Oil Cooler Hose Assembly

 

The oil cooler hose assembly recycles the oil cooler tube assembly, utilizes high quality Eaton crimp-on fittings and Aeroquip hose.

The picture shows the 3/4" design that was used on the '90 to about '92 1/2 model year cars. Almost all of the OE assembles fail with oil leaking at the crimp connections.

Also available is the 1/2" design that was used from about '92 1/2 to '95. The OE late units last much longer than the OE early units. So far leak failures have been few.

A core assembly must be supplied.

The reconditioned assembly includes the o-rings for the tubes.

$260 exchange.